Window tints fade over time, regardless of how expensive they cost or if they came from a trustworthy auto window tinting Bossier City La company. It is recommended to replace the window tints if you notice a change in color or bubble form. Replacing is generally handled by professionals to avoid mess when installing and removing window tints. However, if you have delayed the timing for replacing your tint, it’s possible to get rid of the old tints to avoid obstructing your vision.
What You Need
- Razor Blades
- Dishwashing soap
- Soft cloth
- Spray bottle
- Glass cleaner
What are your best options?
Once you have all your items, follow these steps.
You can take a small part in the edge of the film
Utilizing the razor blade create a small cut on the edge of the film. As long as the blade isn’t pushing too hard, your windows aren’t likely to be scratched.
Slowly peel off the film.
Start slowly peeling the tint off of the window, starting with the corner that you’ve removed. Do this process slow to make sure you get rid of all the window tints at once. You can use a blade to take off any remaining film. You can then continue peeling until you’re satisfied.
Use soapy water to spray on windows
Mix a little bit of dishwashing soap with water in the spray bottle. It doesn’t really matter how exact you are with your measurements. It doesn’t matter how soapy the mixture is. Once you’ve prepared the mixture, you can spread large quantities of it on the surfaces to be adhesive.
Let it sit and soak.
Let the soapy mix rest for a few hours before spraying it. This will allow the soapy water to relax the adhesive and go on to the next step easily.
Scrape the adhesives left behind
A razor is needed to get rid of the adhesive residue off glass. If you’re concerned about scratching your windows, you can scrape them clean and make sure that the glass is moist enough. If the glass starts drying, it is advisable to spray a different soapy solution.
Cleanse the windows
Once you have removed all the adhesive and tint residue from your windows, it is time to clean the windows. All you need is glass cleaner and the softest cloth and a cloth that is easy to clean your windows. If you don’t have a glass cleaner, you may make use of dishwashing soap and water. It is recommended to avoid ammonia-based cleaners. Beware of using harsh cleaners since they can cause scratches.
It’s not hard to remove off the old tints on your windows. This will allow you to apply a brand new tint to your car. Remember to take care not to scratch your windows in order so that your new window tints will be as smooth and flawless.
An auto window tinting Waukesha WI service will help you make sure the window tint replacement process goes smoothly. KEPLER Coatings can provide more information.